H807SA 8CH WS2811 WS2812B Art-Net DMX512 SPI LED Controller H807SB WIFI 4CH WS2812 WS2813 WS2815 APA102 Pixel Controller 5-24V

H807SA 8CH WS2811 WS2812B Art-Net DMX512 SPI LED Controller H807SB WIFI 4CH WS2812 WS2813 WS2815 APA102 Pixel Controller 5-24V

WiFi LED Controller H807SA is an 8 ports output detachable single machine controller that can control up to 8192 points. Supports the Art Net protocol, supports addressing of DMA chips, can connect to the DMA console, and can add or delete DAT files through the local area network.

Currently, the driver chips that can be controlled include DMX512, HDMX, APA102, APA102-65536, WS2801, WS2813, TM1812, TM1809, TM1804, , LPD6803, LPD8806, LPD1882, LPD1889, LPD1883, INK1003, APA104, P943, D9864C, MBI6023, MBI6024, ADT6610, TLC5971, JCS0104, etc.

H807SB is a controller with WIFI function. The V3 version starts to support Bluetooth remote control, with four output ports and a maximum control of 4096 points.

The input voltage is DC5-24V. It can be used for Android mobile app control, web page control of various operating systems, wireless synchronization of multiple controllers, and wireless control of the DMA console.

The communication distance between H807SB and H807SB, as well as between H807SB and mobile phones, is open and unobstructed for more than 60 meters. The communication distance between Bluetooth remote control and H807SB is open and unobstructed for more than 30 meters.

The controllable LED driver chips include DMX512, HDMX, MY9941, UCS1903, UCS1909, UCS1912, WS2811, WS2812, WS2813, TM1809, TM1812, TM1913, TM1926, P943, P9883, SM16703, SM16709, SM16712, etc. The output timing of this controller is different from other controllers, so the control effect and performance of a certain driver chip should be based on actual measurement.

The supporting software is “LED Programming Software” V5.03 and above.

About item WiFi LED Controller H807SA :

• H807SA is an 8 ports output detachable single machine controller that can control up to 8192 points. Supports the Art Net protocol, supports addressing of DMA chips, can connect to the DMA console, and can add or delete DAT files through the local area network.
• Multiple synchronization control can be achieved through a local area network.You can switch files by sending UDP instructions to network port 2, or obtain the current playing file number, etc.
• Can connect to the DMA console, supports RGBW, can replace files, adjust speed and brightness, and has fast response time. Supports the Art Net protocol and can directly use software that supports Art Net such as MADRIX and Jinx.
• It can be connected or disconnected, and can be directly connected to a computer network card, router, or main controller.Supports online firmware upgrades.W can be inserted.Customizable timed playback function.

Characteristics WiFi LED Controller H807SA :

• Four output ports, controlling up to 4096 pixels.
• The SD card supports FAT32 and FAT16 formats, and allows up to 64 DAT files.
• Use your phone to switch files, adjust speed and brightness, and set unicast or full playback settings.
• Can set WIFI working mode and support WEB control.
• Multiple synchronization control can be achieved through WIFI.
• Can connect to the DMA console through WIFI, supports RGBW, can replace files, adjust speed and brightness, and has fast response time.
• Supports online point tracing and offline point counting.
• DAT files can be received and saved to an SD card through WIFI.
• Supports firmware upgrades.
• Supports Bluetooth remote control.

Controller Instruction

• he SD card needs to be formatted into FAT32 or FAT16 format after adding and deleting files many times. Support SDHC (high-capacity SD card), up to 32G bytes or more. Up to 64 DAT files are allowed in the SD card, and the playback order is sorted alphabetically according to the file name.
• Eight output ports, up to 8192 pixels can be controlled. The maximum number of control points for each port is 1024. It can also be set as one, two or four output ports, each port can control up to 2048 points, and the remaining ports can be used as backup ports.
• When power on, the first line of the LCD will display the controller model, and the second line will display the version number, press and hold the “MENU” button and then power on, the controller will automatically upgrade the firmware.
• Press the MENU key to switch the menu, press the ‘-‘ or ‘+’ key to set, long press the ‘-‘ or ‘+’ key to speed up the parameter setting, press the OK key to save the parameter or enter the sub-menu.
• o set a password, click the menu “Settings” – “Controller Password” in the lighting modeling window of “LED programming software”, and the encryption dialog box will pop up, select the controller encryption, and the encryption method is to limit the number of power-on times.
• To use the timer playback function, the *.tab file must be placed in the SD card, and it must be stated when placing an order.

Package:

1 pcs H807SA 8CH WIFI LED Controller