High-quality Stainless Steel Waterfall Or Water Curtain With Rain Effect

High-quality Stainless Steel Waterfall Or Water Curtain With Rain Effect

The Water Curtain Wall Stainless is a versatile product that works both as an architectural interior fountain, thanks to its silent operation, as well as for exterior fountains, thanks to its high wind resistance.

This stainless steel water curtain wall is made of 304 stainless steel and will not rust with prolonged use. Its interior is made of stainless steel, giving it high resistance to moisture, corrosion, and oxidation, and is easy to clean.

It also offers a long lifespan and will not rust when exposed to water for long periods. It is used recessed into the wall and features an elegant and beautiful design, allowing you to create your own waterfall.

The stainless steel waterfall can be equipped with light bars to create a beautiful nightscape. While the open design allows small debris or particles to flow through the waterfall normally without blocking or disturbing the water flow.

Easy-to-install water fountain, ideal for interior decoration and vertical gardens, as the water jets slide in layers over various surfaces, such as glass (allowing image projection), natural stone walls, or wood, among others.

Furthermore, this water wall is an energy-efficient fountain, as it requires minimal pressure and flow rate for proper operation.

Installation of  Water Curtain Wall Stainless:

• Leave 3 cm of free space at the bottom of the wall for the spout to sit. This allows for proper drainage of accumulated water in the sink and prevents strange odors. Dirt accumulated from deposits can clog the sink.
• Install the sink horizontally.
• Use a 32 mm PVC pipe to connect the tap water to the rigid pipe. The hose will last longer and won’t leak due to thermal expansion and contraction.
• After installation, connect the water pump and perform a water test to achieve the desired effect. Then, apply the tile or stone decoration to the surface.

Built-in wall:

• Build the wall and pool, cut a T-shaped slot in the wall, and take the bottom to drain the water from the sink. Connect the water line to the sink.
• Insert the water line and tank into the wall, ensuring the tank is horizontally stable. Connect the water line to the pump and install the pump in the pool.
• Add water to the pool, turn on the pump, check the water flow, and check for leaks (Note: If you can’t add water to the pool during the test, you can use a large bucket of water). 

Notes:

• Do not allow glue, cigarette butts, etc., to enter the pump to prevent them from sticking and causing damage.
• The pool should be cleaned and replaced with fresh water before using it again. Also, especially after testing the running water in a new pool, if the pump is not used for an extended period, it should be cleaned after each use.

The waterfall’s leaves are open, giving you a view of the cascade, making it suitable for creating water curtain walls in patios, gardens, porches, fish ponds, swimming pools, and other locations. This creates an elegant and vibrant free-falling water effect.